博客
关于我
redhat6.9安装oracle11.2.0.4 PRCF-2010
阅读量:443 次
发布时间:2019-03-06

本文共 3952 字,大约阅读时间需要 13 分钟。

redhat6.9安装oracle11.2.0.4 执行root.sh脚本,发现scp文件至节点2无法传输报错

INFO: /tmp/OraInstall2020-05-04_11-56-08PM/mvstubs.shINFO: Copying Oracle home '/u01/app/11.2.0/grid' to remote nodes 'wsgw2'.INFO: Copying Oracle home '/u01/app/11.2.0/grid' to remote nodes 'wsgw2'.WARNING: Error while copying directory /u01/app/11.2.0/grid with exclude file list '/tmp/OraInstall2020-05-04_11-56-08PM/installExcludeFile.lst'  to nodes 'wsgw2'. [PRCF-2010 : All connections to the remote nodes got refused. Cannot proceed with the file transfer. There has to be at least one remote node to send the installer files!PRCF-2010 : All connections to the remote nodes got refused. Cannot proceed with the file transfer. There has to be at least one  remote node to send the installer files!]Refer to '/u01/app/oraInventory/logs/installActions2020-05-04_11-56-08PM.log' for details. You may fix the errors on the  required remote nodes. Refer to the install guide for error recovery. Click 'Yes' if you want to proceed. Click 'No'  to exit the install. Do you want to continue?

查询MOS

Linux: GI installation fails as bindv6only is set to 1: "PRCF-2010 : All connections to the remote nodes got refused. Cannot proceed with the file transfer" (Doc ID 1999296.1)    The firewall is disabled and hence not the cause of the connections being refused虽然版本不太匹配,MOS是12.1 但是其中有关于ip6tables!!!root@node1:~$ /etc/init.d/iptables statusiptables: Firewall is not running.root@node1:~$ /etc/init.d/ip6tables statusip6tables: Firewall is not running.root@node2:~$ /etc/init.d/iptables statusiptables: Firewall is not running.root@node2:~$ /etc/init.d/ip6tables statusip6tables: Firewall is not running. SOLUTIONThe issue is caused by the kernel parameter net.ipv6.bindv6only being set to 1 as seen belowgrid@node1:~> sysctl net.ipv6.bindv6onlynet.ipv6.bindv6only = 1grid@node1:~>The solution is to set net.ipv6.bindv6only to 0 and install the Grid Infrastructure softwarenode1:~ # sysctl net.ipv6.bindv6only=0net.ipv6.bindv6only = 0node1:~ #

实际环境检测

系统安装redhat6.9 防火墙已关闭,但是对于ipv6的服务并未关闭!!! 因此是这个问题导致的,关闭ipv6服务后,ok  两个节点都要操作 [root@wsgw1 CVU_11.2.0.4.0_grid]# /etc/init.d/iptables statusiptables: Firewall is not running.[root@wsgw1 CVU_11.2.0.4.0_grid]# sysctl net.ipv6.bindv6only net.ipv6.bindv6only = 0[root@wsgw1 CVU_11.2.0.4.0_grid]# [root@wsgw1 CVU_11.2.0.4.0_grid]# [root@wsgw1 CVU_11.2.0.4.0_grid]#  sysctl -a|grep -i 'ipv6'|grep 'disable'net.ipv6.conf.all.disable_ipv6 = 0net.ipv6.conf.default.disable_ipv6 = 0net.ipv6.conf.eth0.disable_ipv6 = 0net.ipv6.conf.eth1.disable_ipv6 = 0net.ipv6.conf.lo.disable_ipv6 = 0[root@wsgw1 CVU_11.2.0.4.0_grid]# /etc/init.d/ip6tables statusTable: filterChain INPUT (policy ACCEPT)num  target     prot opt source               destination         1    ACCEPT     all      ::/0                 ::/0                state RELATED,ESTABLISHED 2    ACCEPT     icmpv6    ::/0                 ::/0                3    ACCEPT     all      ::/0                 ::/0                4    ACCEPT     udp      ::/0                 fe80::/64           state NEW udp dpt:546 5    ACCEPT     tcp      ::/0                 ::/0                state NEW tcp dpt:22 6    REJECT     all      ::/0                 ::/0                reject-with icmp6-adm-prohibited Chain FORWARD (policy ACCEPT)num  target     prot opt source               destination         1    REJECT     all      ::/0                 ::/0                reject-with icmp6-adm-prohibited Chain OUTPUT (policy ACCEPT)num  target     prot opt source               destination         [root@wsgw1 CVU_11.2.0.4.0_grid]# /etc/init.d/ip6tables stopip6tables: Setting chains to policy ACCEPT: filter         [  OK  ]ip6tables: Flushing firewall rules:                        [  OK  ]ip6tables: Unloading modules:                              [  OK  ][root@wsgw1 CVU_11.2.0.4.0_grid]# chkconfig --level 35 iptables off [root@wsgw2 CVU_11.2.0.4.0_grid]#  /etc/init.d/ip6tables statusip6tables: Firewall is not running.

 

转载地址:http://dtlyz.baihongyu.com/

你可能感兴趣的文章
mysql8的安装与卸载
查看>>
MySQL8,体验不一样的安装方式!
查看>>
MySQL: Host '127.0.0.1' is not allowed to connect to this MySQL server
查看>>
Mysql: 对换(替换)两条记录的同一个字段值
查看>>
mysql:Can‘t connect to local MySQL server through socket ‘/var/run/mysqld/mysqld.sock‘解决方法
查看>>
MYSQL:基础——3N范式的表结构设计
查看>>
MYSQL:基础——触发器
查看>>
Mysql:连接报错“closing inbound before receiving peer‘s close_notify”
查看>>
mysqlbinlog报错unknown variable ‘default-character-set=utf8mb4‘
查看>>
mysqldump 参数--lock-tables浅析
查看>>
mysqldump 导出中文乱码
查看>>
mysqldump 导出数据库中每张表的前n条
查看>>
mysqldump: Got error: 1044: Access denied for user ‘xx’@’xx’ to database ‘xx’ when using LOCK TABLES
查看>>
Mysqldump参数大全(参数来源于mysql5.5.19源码)
查看>>
mysqldump备份时忽略某些表
查看>>
mysqldump实现数据备份及灾难恢复
查看>>
mysqldump数据库备份无法进行操作只能查询 --single-transaction
查看>>
mysqldump的一些用法
查看>>
mysqli
查看>>
MySQLIntegrityConstraintViolationException异常处理
查看>>